0fSPECIAL BOOT ARGUMENTS - VARIOUS DISK DRIVES07

You can use the following boot arguments at the 0fboot:07 prompt, 
in combination with the boot method (see <09F307>).
If you use hex numbers you have to use the 0x prefix (e.g. 0x300).

0fHARDWARE                     PARAMETER TO SPECIFY07
Adaptec 151x, 152x           0faha152x=iobase[,irq[,scsi-id[,reconnect]]]07
Adaptec 1542                 0faha1542=iobase[,buson,busoff[,dmaspeed]]07
Adaptec 274x, 284x           0faic7xxx=no_reset07 (enabled if non-zero)
BusLogic SCSI Hosts          0fbuslogic=iobase07
Future Domain TMC-8xx/950    0ftmc8xx=mem_base,irq07
Pro Audio Spectrum           0fpas16=iobase,irq07
Seagate ST-0x                0fst0x=mem_base,irq07
Trantor T128                 0ft128=mem_base,irq07
ATAPI/IDE CD-ROM             0fhd{a,b,c,d}=cdrom07   (usually unnecessary)

If your system hangs when booting, and the last message you see is
"aec671x-detect..", try      0fgdth=disable:y07

<09ENTER07> vagy egy indítási metódus, argumentumok és <09ENTER07> a 
bootoláshoz. Az <09F107> billentyűvel a tartalomjegyzékhez juthatsz.